Acadia Outdoor Bench and Table Assembly Guide

Quick answer

Assembling your Acadia Outdoor Bench or Long Table is straightforward with the right approach: lay out all parts, follow the step-by-step process below, and avoid overtightening hardware to prevent wood splitting.

Step-by-step assembly instructions

1. Step 1: Lay out and identify all parts: Unpack the box and lay every wood piece and hardware bag on your work surface. Identify the legs, side rails, seat slats (bench) or table top panels (table), and cross braces. Check the instruction sheet for part labels. Missing a part? Contact customer support before starting—do not substitute hardware.
2. Step 2: Attach legs to side rails: For the bench: insert bolts through the pre-drilled holes in the legs and into the side rails. Finger-tighten only. For the table: same process, but note that the table legs have a left and right orientation—match the beveled edge to the rail. Common mistake: forcing a bolt into the wrong hole can strip the wood. If it does not slide in easily, check the orientation.
3. Step 3: Install the seat or table top: For the bench: place the seat slats across the side rails and secure with the remaining bolts. Work from one end to the other, keeping even gaps between slats. For the table: position the top panels onto the leg assembly and fasten from underneath using the provided screws. Do not tighten fully until all pieces are in place—this allows you to adjust alignment and avoid warping.
4. Step 4: Attach cross braces and tighten everything: For both pieces: install the cross braces under the seat or table top using the shorter bolts. Once all hardware is finger-tight, go back and tighten each bolt with the allen wrench. Stop as soon as you feel resistance—over-tightening can crack the acacia wood. Check for wobble after tightening. If the bench or table rocks, loosen the bolts slightly, shift the assembly on a level surface, and re-tighten.
5. Step 5: Final inspection and placement: Flip the assembled furniture upright. Check that all bolts are flush and no sharp edges are exposed. Place the bench or table on a level outdoor surface. For long-term stability, consider placing it on pavers or a deck rather than directly on grass. Acacia wood will develop a silver-gray patina over time. This is normal and does not affect durability.

Products referenced in this guide

• Acadia Outdoor 48" Bench (Ready to Assemble): Made from naturally weather-resistant acacia wood, designed for outdoor play and learning environments. Acacia wood holds up well in rain and sun, so you do not need to apply a sealer unless you want to change the color.

  

• Acadia Outdoor Long Table 30" x 60" (Ready to Assemble): Seats up to eight children and offers ergonomic height for group activities. The table’s larger size means more hardware and a slightly longer assembly time—plan for 30–40 minutes instead of 20.